Building Regulations (Part P) 2

Building Regulations (Part P) 2

Time limit: 0

Quiz Summary

0 of 21 Questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 21 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

Current
Review
Answered
Correct
Incorrect

Question 1 of 21

1. Question
Within the Regulations, Ventilation is contained in which Approved Document:
- A
- B
- E
- F
Correct

Incorrect
Question 2 of 21

2. Question
1. What details are set out in the Approved Document L1?
- Conservation of fuel and power in dwellings
- Structure
- Fire safety
- Access to and use of buildings
Correct

Incorrect
Question 3 of 21

3. Question
1. If the depth of a joist was 150mm, what is the maximum diameter of the hole that can be drilled in the joist?
- 20mm
- 37.5mm
- 50mm
- 25.5mm
Correct

Incorrect
Question 4 of 21

4. Question
1. The centre-to-centre measurement between holes drilled in the joist must be
- 5 times the diameter apart
- 4 times the diameter apart
- 3 times the diameter apart
- 2 times the diameter apart
Correct

Incorrect
Question 5 of 21

5. Question
1. The location of holes, measured from the support when drilled in joists must be between
- 0.4 and 0.25 times the span
- 0.2 and 0.35 times the span
- 0.5 and 0.75 times the span
- 0.3 and 0.5 times the span
Correct

Incorrect
Question 6 of 21

6. Question
With a 200mm joist depth, what is the maximum notch depth that can be cut in the joist?
- 15mm
- 18mm
- 22.5mm
- 25mm
Correct

Incorrect
Question 7 of 21

7. Question
What is the maximum depth of horizontal and vertical chase that can be made in a wall?
- 0.33 and 0.66 times the wall thickness
- 0.33 and 0.55 times the wall thickness
- 0.66 and 0.33 times the wall thickness
Correct

Incorrect
Question 8 of 21

8. Question
1. The Approved Document on the Fire Safety does NOT apply to:
- Garages
- Shops
- Prisons
- Offices
Correct

Incorrect
Question 9 of 21

9. Question
1. What is the British Standard that details protection by automatic fire detection and alarm systems?
- BS 5983-1
- BS 5893-2
- BS 8539-1
- BS 5839-1
Correct

Incorrect
Question 10 of 21

10. Question
1. Which of the following is NOT a requirement for smoke alarms?
- There is one on alternate floors
- They are within 7.5m of the door
- They are within 3m of the bedroom doors
- They are at least 300mm from a light fitting
Correct

Incorrect
Question 11 of 21

11. Question
The Approved Document that deals with the resistance to the passage of sound came into force on the:
- 1 April 2003
- 1 May 2003
- 1 June 2003
- 1 July 2003
Correct

Incorrect
Question 12 of 21

12. Question
1. When installing electrical equipment in walls that are used to resist the passage of sound, which one of the following is NOT a sensible recommendation?
- Avoid using deep boxes
- Use extra screws to fix boxes
- Stagger position of boxes on opposite sides of wall
- Use a similar thickness of cladding behind boxes
Correct

Incorrect
Question 13 of 21

13. Question
1. The Approved Document on Ventilation does NOT apply to the following?
- House
- Garage
- Office
- Shop
Correct

Incorrect
Question 14 of 21

14. Question
1. What is the minimum area for intermittent extractor fan with background ventilation when adding a wet room to a dwelling?
- 4500 mm
- 3000 mm
- 2500 mm
- 2000 mm
Correct

Incorrect
Question 15 of 21

15. Question
1. For two habitable rooms to be treated as a single room for ventilation purposes, the permanent opening between them must be at least
- 1/30 of floor area
- 1/40 of floor area
- 1/20 of floor area
- 1/50 of floor area
Correct

Incorrect
Question 16 of 21

16. Question
1. The maximum rate of extraction where a gas appliance and a fan are located in the kitchen must be:
- 10 litres/second
- 30 litres/second
- 40 litres/second
Correct

Incorrect
Question 17 of 21

17. Question
1. One way to meet the fixed internal lighting requirements for dwellings would be to fit lamps with a luminous intensity of at least:
- 45 lumens/watt
- 50 lumens/watt
- 60 lumens/watt
- 70 lumens/watt
Correct

Incorrect
Question 18 of 21

18. Question
1. To meet the requirements of the fixed internal lighting regulation a reasonable provision of energy efficient lighting fitting would be one per:
- 30m of dwelling floor area
- 20m of dwelling floor area
- 35m of dwelling floor area
- 25m of dwelling floor area
Correct

Incorrect
Question 19 of 21

19. Question
1. One way of satisfying Approved Document M is to mount switches at a maximum height of:
- 1100mm from floor level
- 1200mm from floor level
- 1300mm from floor level
- 1400mm from floor level
Correct

Incorrect
Question 20 of 21

20. Question
1. One way of satisfying Approved Document M is to mount socket-outlets at a Minimum height of:
- 350mm from floor level
- 450mm from floor level
- 1500mm from floor level
- 1200mm from floor level
Correct

Incorrect
Question 21 of 21

21. Question
How many Approved documents are there?
- 9
- 10
- 15
- 18
Correct

Incorrect

Login
Sign Up

Remember me Forgot Password?

I accept the Terms of Service and Privacy Policy

Lost your password? Please enter your username or email address. You will receive a link to create a new password via email.

0

0

Your Cart

Your cart is emptyReturn to Shop

Continue Shopping

Login

Accessing this course requires a login. Please enter your credentials below!

Username or Email Address

Password

Remember Me

Lost Your Password?

Register

Don't have an account? Register one!

Register an Account

Username

Email

Registration confirmation will be emailed to you.